Lid Panel: marked up content.

Mark Up 1 to 3 of 3

• Show Group

  Lid Screws
  There are 12 screws you need to unscrew to release the lid.
• Lid Clamp Release Catch
  There is a metal disk (next image) that physically impedes the clamp from releasing. You can ease this off gently but firmly when removing the lid. When re-attaching the lid, make sure the clamp is pushed back, or there will be a grinding noise when turning once reassembled.
• Safety on/off switch
  There is a safety on off switch that turns the platter off when the lid is opened. If this is not in place correctly the platter will not turn. Watch for this when reassembling.