Arm Motor, Circuit Board and Arm: marked up content.

Mark Up 1 to 6 of 6

• Button Control Cables
  Remove this to detach or remove circuit board (see next image)
• Earthed Transistor
  Unscrew this to detach or remove circuit board (see next image)
• Stop / Repeat / Return cabling
  You will also need to detach this to access behind the circuit board.
• Arm Belt
  If the arm is not traversing properly, or not at all, the usual solution is to change the arm belt.
• Arm Pole
  If this has been 'greased' best thing is to remove it. I have used WD40 dry PTFE lubrication.
• Circuit Board Screw
  Despite the additional holes for screws, only one is used to hold the circuit board in place.